Questions

ADOBE PREMIÈRE PRO 25.5MAC BOOK M3Je place comme d'habitude un masque ( flou gaussien) sur une zone dans mon image, et lorsque j'appuie sur la flèche blanche "suivi du masque sélectionné vers l'avant",  le suivi du masque d'effet ne s'affiche plus en lecture dans la fenêtre programme.  L' effet est pris en compte, mais on ne peux plus le visualiser durant l'éxecution, ni donc vérifier au fur et à mesure si il faut agir dessus.

I am doing a voice over. My problem is that each time I record a new clip I have to apply my audio effects to it manually (this is tedious). I know I can apply effect to an entire track, but I can't seem to apply my preset to it. The problem is that i don't want to manually replicate my EQ mixing in the new window.

Hi everyone,I'm working on creating a tutorial video where I want to highlight specific parts of a website or app interface. Ideally, I’d like to zoom or pan into the highlighted section while blurring out the rest of the screen to help viewers stay focused. I’d also like to add arrows pointing to key areas. I’m not sure what this effect or tool is called, but I’ve seen it used in tutorial videos—specifically from Jeff Su’s YouTube channel. I’ll upload a screenshot as an example to better explain what I mean. Any suggestions on what tools or techniques I should look into would be greatly appreciated.

Hola!   Me he cambiado el ordenador, también un macbook air con chip Apple M4, mac os Sequoia 15.5.   Intento instalar Premiere Pro y me sale este mensaje: "No puedes abrir la aplicación Premiere Pro Installer porque no responde".   Alguien sabe cómo lo puedo instalar sin que me de este problema?   Gracias   Anna

Hi all,I've searched the forum but can't find a thread about this... I'm experiencing a strange feature/bug that's pretty irritating. A few minutes after I start Premiere, the timeline will start scrolling whenever I move my mouse cursor away from the center of the screen. You can see this happening at the link below:Private Video on Vimeothe password is: autoscrollTo be clear: this doesn't happen when I first start Premiere. It's usually 5-10 minutes into a session, and then I have to quit and re-start the program to get a few minutes of peace. Is this something I've accidentally turned on, that I can deactivate? It's really annoying to have the timeline scroll to follow my cursor, when I go for my effects or media browser.iMac running 10.10.3, Premiere Pro CC 2014Thanks for your help!Paul

Whenever I sync multiple audio tracks down to the nearest sample using "show audio time units" and THEN move my clips to a different part of the sequence, to a new sequence, duplicate the sequence, or even just close and re-open my project file, all the audio in my sequences un-syncs back to where it was originally, to the nearest frame. It's like premiere just forgests everthing about where I moved my audio track to at a sample level and only remembers information at the frame level. All my audio is in 48 kHz and it's not a drift issue. All the clips just un-sync when I do any of those things above.Anyone have a solution or workaround for this, or is it just a bug in premiere they need to fix?

Hello I am working with a client on Premiere Pro productions. I work on a Windows and my client works on a Mac, we are working on a productions project using a dropbox account synced with both our drives, everything is working great but my client recently brought an issue saying that the sound effects I had added were not synced to the movements, although at my side that didn't seem like how it is going, whole working on the project he also mentioned that some of the dialogues are starting soon or cutting in between which was not happening on the timeline at my side. Another issue is that I have used some Film Impact transitions and effects and some legacy effects, but on the client's side the project is giving an error of missing plugins, {Video Transition missing:  FI: Text AnimatorVideo Transition missing:  Paint SplatterVideo Transition missing:  Random BlocksVideo Filter missing:  FI: Text AnimatorVideo Filter missing:  Change to Color}Although as far as I

Working on an iMac, Apple M1, running on Sequoia 15.6.1, I get a "Force Quit Applications" notification on screen when attempting to export an 80 minute video. The application completely stops the exporting process at 22% and doesn't move for more than 30 minutes. I've cleared all caches. A little frustrated on this, as this has been a problem since early in the week, and I edit a weekly video podcast. How can this be fixed? Please advise. 

Hi, I want to fully understand how to read the motion path in my animated still, and have a few questions: 1.   What does the endpoint of the downward path at the right represent in the 2d screenshot?  This endpoint is where the image reaches the 3rd set of keyframes, and stops panning up, left and zooming in.  It obviously has a specific relationship to the image, I just don't know what it is. 2.  In the 3d screenshot, the vertical path is just reflecting the upwards movement of the pan, right?  But why is it a solid, not dotted blue line? 3.  In the 4th screenshot, a dotted line appears moving leftwards and down.  This comes during the 2 sets of keyframes where the image is panning left and zooming in, as the image has already started moving both left and up.  Its appearance seems random to me.  Why does it start where it does, and what is it showing - that the image is panning left? @Conrad_C helpfully explai

If I use an External Recorder such as Tascam 701-D, or Mix-Pre6, during a shoot, I use the PluralEyes 4 to Sync the Audio Of the Recorder, and the Camera, at It does a pretty good Job. Inside Premiere, there Is an option of Merging Clips and Synchronizing Clips.Which Method is the Best choice using Plur Eyes 4, or the premiere Synchronizing options?Thank you very much.

Hi , I have anissue with adobe premiere 2020 with not allowing me change the text for simple text. I thought the issue from the file I am working witih, but unfortunatily I tried that with new project and the issue still exist.it is not reponding to me while I want to change the font ftom the listMy os is windows 10. here is a image for the issue.

Adobe and Community, please help me out:   I am working on creating a database of video clips, all of which have audio narration. The goal of this database is to have associated transcripts to act as metadata for the video clips. The Adobe Premiere transcription feature seems like a silver bullet at first glance, but it has two major flaws. First, the .prmi is not editable, meaning one cannot simply open it up to fix bad transcriptions. Second, editing the transcription on Premiere does not update the .prmi file - the corrections are only stored with the project they are in. So the database will keep the original bad transcriptons. Also, I ALREADY have transcription of all the clips even before the .prmi is created, so it would be ideal If I could feed these transcripts to Premiere so it doesn't have to generate a transcription from scratch (with errors). If anyone has a solution for this workflow, they would be my hero! Possible solutions would be: 1. A way to open .prmi fil

System: GTX 750Ti 2GB, Ryzen 3700X, 32GB DDR4 Issue: While scrubbing through each frame going to next or previous frame shows way ahead or way before frame respectively for a flash of a second and to the intended frame. That was during each frame scrub but fast playback also has some stuttery playback not smooth while MP4 is smooth. When: The issue arises when Hardware Encoding is enabled. MP4 scrubbing works fine on both HE and SE method but MKV suffers on HE only.  Tried on: OBS encoded MKV file with 10Mbps bitrate VBR, 60fps constant, 1s keyframe interval, 1 B Frame. With same settings MP4 files just works buttery smooth.

I got this error but can't find any way to fix it

Hello there!This is the 1st time I'm having this issue.Whenever I press <return> to render between the I&O points, Premiere (after rendering) starts the playback at the beginning of the timeline and NOT at the IN point. This is definitely (for me) not a functional way to work.Any hint on how to change this?Thanks in advance.

Hey there, due to Auto-save. every 5 minutes my Premiere freezes for ~ 10 seconds, which really messes up my workflow.I'm on the latest Version of Premiere. Things I tried to fix this:- resetting cache/preferences- deleting the existing auto-save files- importing the whole Project into a fresh one- changing the Auto-Save to different intervals (20mins for instance)- changing the Auto-Save location to different local drives- fully disable auto save in preferences, which still did nothing. All these things didn't change anything, still every 5 minutes Premiere freezes and creates another Auto save (I see the little auto save icon top right working). Please help, it's really tough to stay focused like this. Kind Regards,Philipp

I feel like you should be able to attach proxies to full resolution media based on video and not just audio - I have hours worth of proxies that a DIT made and the audio channels don't match the source files so I can't connect them. I can do this the traditional way, working with proxies, until picture lock, unlinking and then re-linking to full resolution media, however I'd prefer to have both on hand in Premiere.

For some reason, in Premiere over the past couple days, my project keeps generating errors that state... Frame substituition recursion attempt aborting after multiple attempts on file...andError retrieving frame [number] at time [time] from the file [file path], substituting frame [number] While these messages display in the Events window, the footage I am trying to edit and color grade will not display in the Program window. In fact, as I  move the current time indicator in the timeline, the error recurs and keeps recurring. The errors aren’t present immediately after I open the project, but start to pile on after I make a few changes to the clips. The only thing that seems to clear these errors is to restart Premiere. But that works only temporarily. What is happening and how can I stop it from continuing? Please advise. Thanks.

I added 18 clips to Premiere.  Then selected and dragged them all onto the timeline.  I was cutting out segments and all wasy good.  At some point I noticed the timeline was just one clip and all the rest weren't on it.  Tried going back in my "clipboard" but never changed.  Am I missing something?  Did I somehow set focus on one clip and there is a way to get back to the overall timeline with all the clips on it?

More of a rant than anything. I dont see how Adobe can consider Premier Pro as a premium product. We pay through the nose for a product that is so incredibly buggy and crashy, forcing you to loose hours on projects that you cant get back.I WISH adobe would consider updating these years old issues, instead of focusing on flash new AI programmes.Why cant i add time remapping and warp stabilizer on the same clip?Why does Premier pro crash almost every time i replace a sequence with an after effects composition? Why do my Auto saves COMPLETELY WIPE THEM SELVES after its crashed using the legacy exporter?Sort it out adobe. This is an expensive product and you can't get the basics right.Very disgruntled and considering switching to Da Vinci at this point... Final Cut would be a better alternative. 

What exactly does the "Align in Timeline" function (shortcut: S) do in Premiere Pro? The symbol for it looks like a magnet. I'm in the process of learning Pr, so I would like an easy-to-understand explanation that explains everything anyway 🙂 Thank you in advance !!   [text formatted by mod]            

Hi @Mathias Moehl  Is there a way in Automation Blocks to 'press play' on a timeline and play down the active sequence? Maybe some code in the extendscript block? 

Hi there! This is my first time posting here so feel free to correct me if I you should approach this issue in some other fashion. I love the new way Premiere Pro works with captions and it has really sped up my workflow. However I have one issue with how the background of the subtitles work. I am able adjust the size of the background box around the text, but I am not able to adjust the height and the width independently. This forces me to add spaces to the start and end of each line to manually create more padding on the sides. This workaround adds up to a substantial amount of time. I have attached a video if I haven't explain what I mean well enough.  It would great if you could add this functionality! Please enlighten if I just haven't found the right buttons 🙂 Best regards,Trym

Sucede que inserto cualquier clip de video a mi línea de tiempo y claro aparece video y audio, aparentemente vinculados pero al cortar o al arrastrar solo selecciona uno o audio o video, es decir como si estuvieran desvinculados.Probé desvincularlos y volverlos a vincular, pero el problema persiste.Gracias

I have a slideshow with 600 photos and an Excel sheet with 600 names.How can I batch create a simple static lower third with the names changing?Without typing in each name one at a time.