Photoshop

Bonjour, Les traductions autour de "l'outil image" sont très mauvaises : l'outil devrait s'appeler "outil cadre", on met l'image dans le cadre. D'ailleurs, dans le tutoriel, il est tantôt question d'outil image, tantôt d'outil cadre. La commande "supprimer l'image" supprime le cadre et non l'image. C'est incompréhensible.

In Photoshop version 26.2.0, I noticed that the color picker is triggered using the Alt key. However, it is very slow, causing dots to appear when using the brush tool, and the selected color does not update quickly. This issue does not occur in version 25.12.1. Please address this problem as soon as possible. The color picker feature activated by holding down the Alt button is too slow, and it ends up leaving a dot.

Hello! I'm trying to solve a printing issue where Photoshop crashes every time I try to print. I currently have Photoshop CS5 Extended version 12.0 x64 and I'm running MacOS High Sierra 10.13.6 on a Macbook Pro. I saw a post here that updating to version 12.0.4 might resolve the issue, but the link on that page was dead. I also found another post with an updated link in the comments, but that one didn't work either (it brought me to an FTP that gave an error message: There was a problem connecting to the server "ftp.adobe.com". The share does not exist on the server. Please check the share name, and then try again.)I spoke to several Adobe representatives, but none of them were able to provide me with a link to the update so they recommended I post here.Does anyone have a link to Photoshop CS5 version 12.0.4 for Mac?  Thanks,Matt

Photoshop 16.1.0 Verlaufswerkzeug in Maske von Tonwertkorrektur ergibt Programmfehler  

I have been using an old version of photoshop on my laptop running Microsoft 11 with no problems. Today I start it and it starts to install and gets to installing color preferrences or sometime something else and then disappears. I try again multiple times and same result. I restarted my laptop. Same results.

El desplazarte hasta abajo resulta incomodo, además sería bueno poder organizar estos archivos abiertos por ultima vez modificado (aunque no se haya guardado aún).La idea es que todo esto que esta en rojo se pueda colapsar como sucede con organizar y espacios de trabajo.Gracias 

Esto de no poder guardar el archivo jpg es super incomodo, es decir, si tengo mi archivo por capas y quiero guardar un jpg o png deberia ser un solo click. 

Hi. I have created a lot of images for some product material using the "Filter Gallery" and specifically the "Photocopy" filter. But the next time I open Photoshop, I can't get the images to look like the previous ones at all. Even if I try applying the filter to an image I have already edited before, I can't make it look the same anymore.Has anyone experienced the Filter Gallery changing drastically, or am I missing something that has changed?I really hope someone can help?I have attached an image of the first time I used the filter and how it looks now.

I had two other artboards with this one that I had spent a lot of time on creating my resume through here. They just disappeared, and I have no idea how to get them back so I can update my resume. I know Photoshop updated and I don't know if that could be part of it. I need a way to fix this though, so I am not spending another 2 hours recreating the rest of my resume again.    

Hi all,after updating to PS 25.0 Neural filters use CPU instead of the RTX 3090. In the 24.0 and in the beta version prior to this update it all worked flawlessy.GPU is activated in preferences and Compatibility is all green. I'm on windows 10 Pro 22H2 (19045.3570), Nvidia driver version 537.42 (not studio version). What can i try? I had some issue with Lightroom, but found a solution on this forum. I modified a config file forcing LR to recheck GPU compatibility. Thank you,Dario

Hallo,ich möchte "einfach" nur ein Droplet das Bilder/Anzeigen (jpg, png, tif, PDF etc) leider bin ich nach fast 30 Jahren PS nicht dazu in der Lage 😉Ich nutze PS 26.2. auf einem Mac Mini m4 Pro, Sequoia 15.2Ich habe eine Aktion erstellt, Droplet erstellt, Sicherheitssausnahme am Mac bestätigt.Das ist in der Aktion- in CMYK konvertieren (versucht habe einmal mit Modus-> CMYK und einmal mit "Bedingte Modusänderung")- 300dpi einstellt- als jpg2000 oder tif im Quellordner (oder irgendeinem anderen) speichern- Datei wieder schließenFolgende Fehler hatte ich:Fehler: Der Befehl "Bildgröße" ist momentan nicht verfügbar. (-25920)Fehler: Der Befehl "Bedingte Modusänderung" ist momentan nicht verfügbar. (-25920)Fehler: Der Befehl "Modus konvertieren" ist momentan nicht verfügbar. (-25920)Vielen Dank im voraus 🙂

Hallo, ich habe plötzlich ein Problem mit Photoshop cc 2017.1.6. unter Windows 11.Alles funktionierte bisher einwandfrei und plötzlich ist es nicht mehr möglich eine jpeg-Datei als jpeg-Datei in einem anderen Verzeichnis/Partition zu speichern oder zu exportieren.Es wurden keinerlei Updates, auch nicht von anderen Programmen, installiert

photoshop generative fill changes objects, not deleted them, I want to delete the image marked in red, but each time it adds another object instead of deleting it. I have tried many ways but it won't delete it. Not for this image. I have the same situation with different images. It never deletes it. 

I've been working on a big file that has many layers sorted into groups and all of a sudden I find that all the layers within each group have become invisible. I normally click on a group and that group then becomes visible, but now it does not because all the layers within it have become invisible. In order to make the whole group visible I have to now open it and click the Eye icon on every layer and open every group within the group and do the same.How has this happened? And surely there must be an easier way to make all the layers within a group visible? I've searched for ages, looked in the instructions, but no luck.Does anyone understand what I mean?

Hi, I was working on photoshop and suddenly my device crashed and restart. I opened photoshop again to recover the file I was working on, but it gives me black screen with some red color at top and it shows as an image in layer panel. is there any way to recover the file. or some of it. cause at preferrance it should save every 10min.

I have a GTX1660SUPER and have in enabled in Preference > Performance. Under Filters > Neural filters, I have the option "Use graphic processor" ticked. However, when I use the JPEG artifacts removal, the CPU usage goes up to 100% while GPU seems to be doing nothing. How do I make it utilize my GPU?The system info is pasted below. Sorry it's shown in Japanese. Thanks in advance! Adobe Photoshop バージョン : 24.4.1 20230418.r.449 53a6c60 x64 起動回数 : 113 オペレーティングシステム : Windows 10 64 ビット バージョン : 10 10.0.19045.2846 システム構成 : AMD CPU ファミリー : 15、モデル : 1、ステッピング : 0 MMX、SSE Integer、SSE FP、SSE2、SSE3、SSE4.1、SSE4.2 実装、AVX、AVX2, HyperThreading 物理プロセッサー数 : 6 論理プロセッサー数 : 12 プロセッサーの速度 : 3593 MHz 内蔵メモリ : 16307 MB 空きメモリ : 10442 MB Photoshop で使用できるメモリ : 12021 MB Photoshop で使用されているメモリ : 70 % クラッシュハンドラー : Adobe DCX Version: 6.23.1 SAM SDK Version: 3.6.4 ACP.local Status: - SDK Version: 3.0.1.1 - Core Sync Status: Reachable and compatible - Core Sync Running: 6.5.0.24 - Min Core Sync Required: 4.

 I am trying to save for the web an image of 10800x1080 px cut in 10 slices of 1080x1080 px and impossible to save it at 100% size ! Why is that ??? I use Photoshop 22.5.1 on MacOs 10.14.6Thanks for your help

Hello, I have the latest version of Photoshop and I wanted to know why not adjust all the RAM memory in the perfomance panel

When I drag a pdf into Photoshop and it creates a Smart Object - the image is very pixelated. The Anti-alias checkbox in the top bar is greyed out so that doesn't seem to be an option. When I open the same pdf with Photoshop, at the same resolution, it creates a good quality image - just not a Smart Object.  Is there a setting I can change to make it work better when dragging in PDFs? I used to do it and it worked just fine. 

Hi Hive mind. Please help. My Photoshop has gone weird. If i am in the program, i can open files from the program no issue. But i cannot open any files in with photoshop from outwith the program. Make sense ? If i click on any file it will ask ( as normal ) what program i want to use to open file. In that menu, photoshop only shows as photoshop.exe. I click on that and nothing. If i look for the option of find another program on this pc, i can find photoshop but again i only have photoshop.exe. Have uninstalled and reinstalled multiple times but still exactly the same. Have tried redoing the default app to open files option but nothing. Any ideas please ? Thanks in advance

A rather odd problem arose yesterday.  I was trying to add a Motion Blur filter to an image. (Photoshop CC2018 - MacBook Pro Retina, 13-inch, Late 2013 Sierra 10.12.6 16G1036) Suddenly the image tilted about 30degs to the right. Nothing I could do would change this. There was no action in the History to undo.  Even stranger, when I tried to straighten it even the Guides come down at that angle.Any ideas?

My students and I are all working in the same version of Photoshop 2025, but our basic Hands-on tutorials are different versions. For instance my "Getting to know the App" has giraffes and waterfalls, etc. and all my students have a lady with an orange circle and roses. Any clues how i could make them the same? Thank you!

I am trying to mimic the below image on a portrait to be used at a funeral. Can anyone help with how to create this cloud-like effect where the image fades out into white? I have searched everywhere and not having much success, even the ole' chatgpt wasn't useful.  Where I am stuck....I used the adobe preset to convert my image to watercolor and cleaned it up from there. The issue with the adobe preset is that it just sticks a background on it, and creates somewhat hard lines that do not cleanly fade into white. It is being printed on a white canvas, hence the reason I need it to fade into white before it gets to the edges of the canvas.  Thanks!

when I use generative fill, it's not work. I updated the last version, and I have enough credit.

I recently wrote a but about using a wacom and Windows ink you cannot pan the image while selecting. There's also a bug with ESC button not working to end the Polygonal lasso selection with a tablet using Windows INK, which is very annoying. in 95% of the times it does not work. This is with the latest version of photoshop on PC Windows 11, but I assume it is a general problem with all Windows INK.