Photoshop

Hello, is there anyone who can teach me where these designs are drawn? Or do we have friends who draw these?

Hola, a ver si alguien sabe si esto tiene alguna solución: cuando utilizo la IA generativa para añadir un objeto a una foto y quiero equilibrar el color o tono mediante una capa de ajuste ocurre que el ajuste lo aplica a todo el recuadro al que previamente indiqué a la IA que debía colocar el objeto. Esto es, no añade el tono solamente al objeto, sino a todo el encuadre. ¿Hay solución a esto?Gracias

I suppose this is an easy one, but still I didn't find a quick answer.My colleague has the problem that when she want's to paint a layer mask, it stays locked until she clicks it visible in the channels.This is not the behaviour we are used too and it is not the behaviour or my Photoshop.Photoshop CC  2017.1.1 20170425.r.252 on Windows 7 SP 1.

I created 3 planes in the vanishing point filter, but when i move my object from one plane to another it doesn't bend properly, it flips and gets distorted instead. anyone knows how to fix this ?

Hey, only the top and bottom stroke is visible. I want all four sides. Yes, I did check the canvas size versus the image size. They are both the same at 1080 x 1080 px.  Please help, I'm having a stroke here with all this craziness. <g>

Bueno no se a cuantos les molesta esto pero a mi si me ha molestado porque cuando quiero reducir una imagen en photoshop usando los tamaños en la ventana de propiedades, al dar el tamaño que quiero se reduce buscando la esquina superior izquierda y no queda la imagen en el centro de la mesa de trabajo, he buscado por varios lugares donde esta el punto de ancla de photoshop asi como el de illustrato, para que al especificar un tamaño este se reduzca proporcional o a la direcion que yo lo indique, no se si photoshop quito o no trae esta opcion espero de sus comentarios a todos saludos.....  

Sorry if this has been posted before however I couldn't find it. I am doing a knockout effect, but it just disappears when I take the fill down. I tried do this grouped and ungrouped. I am sure it's a simple fix but not sure what it is. Here is a recorded screen shot... 

Recent change from CS6 to the latest PS.In CS6, I used the Ocean Ripple filter via Filter Gallery, and everything worked as expected. I have tried the same filter in the newest version and it applies the filter as before, however it cuts off a considerable portion of the right and bottom edges. It appears to then upres the image as the dimensions are the same as the original. It appears to be cropping and upressing without my input. It does not crop when using any other filter.This topic was subject of a prior post but no real answers were offered, other than a suggestion to add more canvas, which really doesn't solve anything.Can someone advise if this is the way the latest version operates (and if so....why?) and if it is not supposed to be working this way, how do I solve this issue? I have tried re-setting Preferences to default, without success.Thanks in advance,

When rotating an image with the Crop tool, by clicking outside a corner and dragging a grid appears which is useful for making sure that the horizon is level etc.  The size of this grid used to be able to be set via Edit->Preferences->Grids, Guides and Slices and by changing the 'Gridline Every....'  and the 'Subdivisions....'   OptionsIt now seems that the grid that appears when clicking outside the corner of the cropping area while cropping is not affected by these settings. These settings only seem to affect the grid that is invoked using View->Show Grid.Is this a bug or is there some other way to specify the grid size/spacing when rotating with the crop tool?System InfoAdobe Photoshop Version: 21.0.0 20191018.r.37 2019/10/18: 614690fb487 x64Number of Launches: 56Operating System: Windows 10 64-bitVersion: 10 or greater 10.0.18362.329System architecture: Intel CPU Family:6, Model:14, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4

Hi:I have been a big user of the lasso tool for selection windows that dont have rounded edges. Why now are my rectangular or sqauare selections resulting in rounded edges when that is not my wish. How do I return to the old behavior — "the selection I crete does not have rounded edges." Many Thanks David 

I've searched the boards with no effective solution. My Text Warp button is not available when I highlight the text. In fact, the little T gets replaced by a white circle with a line through it. When I atempt to open the Warp Text tool trough the drop down menus, it does the same thing. No tool is launched. The operation is rejected and ignored. I unchecked the Enable Narrow Options bar with no affect. I'm running Macbook Sonoma 14.5 and Photoshop 2025 26.1.0 Can you help me?

Bonjour, quand je supprime un masque je n'ai plus le message me demandant si je veux appliquer lke masque avant, Où puis je identifier que je le veux. Voir dans mon ficher le message que je voudrais voir.  Merci

Suddenly, I am unable to adjust levels on any file/image I'm working on. I have tried shutting down the computer and rebooting. I am able to slide the sliders but nothing impacts the levels of the image. The droppers don't work either. I wonder if I accidently hit some setting or there has been some update on I activate this feature overnight. If you have any advice, I'd appreciate it. Thanks.

Hey all,So I have an image, I make adjustments in the Levels window, I see the changes on my image (and they are drastic, obvious changes), but when I click OK the image resets? It is NOT a zoom or image scale problem. Not sure whats up? Just started happening today?Adobe Photoshop CC  v.20.0.6

Getting "Your Photoshop Brushes cannot be modified because it is a read-only library" error when trying to add a PMS swatch using Pantone Connect in Photoshop 25.5.1 . No issues in Illustrator or InDesign. Uninstalled and reinstalled both Photoshop and the Pantone Connect Plugin and also tried using previous versions of Photoshop.Premium version of Pantone ConnectSonora 14.1How can I change permissions for the Brush Library?  

 When I select the reflections feature in ACR, this ir the result instead of removing the reflection. Any ideas?

Good evening, I've been having a bug with the Liquify tool.Clicking on it gives me the error box stating "Could not complete liquify command because of a disk error." I've search a few errors around for this similiar problem. And nothing has worked. Trying to use a face slimming technique where I'll need to use the face tool. So I can't use the Alt + Click on Filter -> Liquify to work. If I do, it says to "Make sure Graphics Processor is enabled". It says this even if its already selected. So Clicking that to turn it off does not work either. I've also seen some say to disable their display adapter, and that works until it comes to time to save and then Photoshop crashes because it's so slow. There's only one scratch disk, my desktop has 20+ GB of free storage and my Portable hard drive has 700+ GB of free storage.  My Laptop specifications below, just recently updated my computer as well. What else could be wrong?............................................

Essentially pressure sensitivity is dictating the brush tip size and opacity, even though in the brush settings it's turned off.  I've the basic brush, soft round settings and the mixer brush as well.  I've tested it with a simple white canvas and I've painted - same results as if pressure sensitivity is turned on. Is there some new hidden way to turn this off?Side note - it would be lovely if Adobe stopped changing basics, hot-keys, etc (from established norms) for NO APPARENT reason.  It's exhausting that they spend development time doing this and not fixing the multitiude of bugs in every-single-update.

HiThere were some clever ideas that emerged in our previous pallet fork challenge, thanks to all who took part.   This week we are outdoors, visiting the lighthouse at Bamburgh, in the north east of England. It's a calm day with little action on sea or land, but what might it look like at a time of high seas and action?   The “rules”: Use the starter image as at least part of your own image entry. Anything goes, as long as it meets the forum rules on decency, copyright, etc. Anyone, and everyone, is welcome to have a go, whether you are a complete beginner or a Photoshop expert. This is not just for our forum “regulars”. There are no prizes apart from the chance to practice, show off your skills, or bring a bit of humor and fun. Don't be shy, join in and have a go! The starter image is made available for you to use in this forum challenge only.   To download the image, hover over the image and click on the circle with the arrows at the top right. Then, when the image o

Hi,Photoshop AI stopped working with latest update.I had been using it regularly with no problems before the update.Please help as I use PS daily for my work! (and I work for myself so cant leave this to the IT dept!).I have been through Adobes guide to the NVIDIA settings and no change (though i dont see "sniffer.exe")I did the GPU compability test and all OK.Pass: OpenGL available Pass: DirectX available Pass: DirectX feature level 12.1 available, feature level 12.0 required Pass: Above required VRAM (4007 MB of 1500 MB required) GPU Detected: NVIDIA GeForce GTX 1050 Ti with Max-Q Design (NVIDIA)SYSTEM INFO:Adobe Photoshop Version: 26.1.0 20241113.r.121 158e617 x64Number of Launches: 72Operating System: Windows 11 64-bitVersion: 11 or greater 10.0.26100.2454System architecture: Intel CPU Family:6, Model:14, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreadingPhysical processor count: 6Logical processor count: 12Processor speed: 2208 MHzBuil

I have an older Photoshop CS6 I purchased and installed on two pcs (only allows it to be on two computers).  I uninstalled it from one of my older pcs and took the pc to be decommissioned and recycled by the Geek Squad.  I installed CS6 on my new pc but it keeps asking me to deactivate it from my old pc which is now history.  How can I get CS6 to recognize that one of my installed copies has been deactivated and now is on a new pc?

I been having this issue Could not open “Filename.psb” because of a program error since i got my new Macbook pro. I could open it once and save it but if I closed it and opened at a later time I would get the "Could not open “Filename.psb” because of a program error" But If I Rebooted my computer and Tried to open the file it worked again but then If I closed the file and tried to open it again I would have the same problem. Now I cant open it anymore. I tried removing my settiings folder in the library folder, and updated photoshop. Nothing, I posted the log file belowPhotoshop Error information Code: -1 Text: because of a program error Message: Could not open “Color-Caps-Labels-IL.psb” because of a program error. Stack: Adobe Photoshop 26.2.0 20241207.r.140 bc85906 - arm 0 address: 0x104914a08 base: 0x1045e8000 module name: 'Adobe Photoshop 2025' symbol info: '0 Adobe Photoshop 2025 0x0000000104914a24 Adobe Photoshop 2025 + 3328548' 1 address: 0x1048d7cf8 base:

Hi!I would like to ask for help: Generative AI doesn't work in any adobe product, it throws the error that is attached in all cases, regardless if I open a completely new project or if I only want to fill a selected area.I've tried everything I could find on the forum but nothing has worked Windows version: Windows 11 Pro 24H2 (26100.2605 build)Photoshop version: 26.2.0 I can send logs if it helps.

Have a few issues here.Using most recent Photoshop subscription. Have deleted and reloaded Photoshop for a fix - didn't help.1 - Isn't recognising/opening some files that were originally created in Photoshop.2 - Not allowing me to save as jpegs - only a short list to include tiffs.3 - When desiring to print a PS jpeg, the printer kicks-off/ends PS program from the laptop.4 - PS won't display thumbnails in CLOUDThanks in advance

Hi, I am new to ExtendScript but I develop in Javascript from years. I am trying to make a script for PS 2020 that do these steps: 1. open psd file2. look at layers in a group    - those layers are a convex shape for each layer of a certain color    - the color is a specific one from a defined swatch and has a specific name3. get the color from the center of the shape4. read the exported swatch to identify the name used5. read the exported tool preset to identify the font properties to use searching by name6. write some text from a file in a text layer of the dimensions of the shape    - the text has a certain font, dimension and style from a tool preset with the same name of the swatch used7. save and close I have trouble to do the steps 4 and 5 as I don't know how to do them and I can't find it on the documentations. If it can't be done from an external file it's not a problem getting it from PS. Does anyone know how to code it? Thank you.