Bug Reports

Premiere pro multicam issue where: if you toggle video track off and then exit that multicam sequence into the nested sequence which is taking the multicam from, even if you go back to the top level multicam and toggle it back on it still wont reflect that in editable sequence and it stays off. The only way around it is be restarting premiere and then its fine. It's a really frustrating bug that's been plaguing me for id say since 2018. It's been happening to me across multiple devices and versions.

I recall tracking working at some point, and I'm not sure what might have triggered this behavior to happen but now whenever I try to do mask tracking, progress bar does not move at all. Specifically I'm trying to make a gaussian blur mask to follow a face in my video. Steps:1. click on the Mask path and click on Track selected mask forward 2. Progress bar does not move, just gets stuck with this: 3. I press Stop because nothing is happening4. Mask path buttons are now disabled. 5. Upon creation of new Mask, buttons become reenabled.   This has happened to all my recent projects. Haven't seen it work in a long time and I've had to do things manually which is a massive pain in the ass.  Other metadata:Premiere version: 25.1Machine info: Mac studio 2023 M2 Max 64GB ram, Sequoia 15.3    

I used Object Masking to remove my character form the green screen. When placed on any background - video, black, colour matte - object is normal. When placed on any image background, object is transparent. Cannot Interpret Footage as it is extended with AI premiere feature (i have another clip that been untouched and the same problem appears.)  

I recently/was finally forced to update from v24.1 to v25.1 due to others I work with having done so. One of the many frustrations adapting to the big changes driving everone nuts (feeling's mutual) is this issue for me with the Rolling Edit Tool. I'm assuming it is a bug, but maybe there is a setting that did not get accurately transfered during the migration of settings from v24.1 to v25.1 that I just can't seem to find. The issue:When adjusting a cut on a multi-camera sequence during playback the change is not recognized in the Program Monitor until you stop and start playback. Attached is a video showing what I'm talking about.  Hopefully I've explained clearly. Thanks in advance!

I'm working with dual-mono audio from a Zoom H4n (24-bit / 48kHz stereo WAV), synced into a multicam sequence using Premiere's sync function.When Premiere brings the WAV into the multicam sequence, it automatically splits the stereo WAV into two separate mono tracks, Track 1 as L and Track 2 as R. These are then panned hard left and right respectively in the multichannel multicam sequence.The issue: waveforms in the downstream stereo sequence will only display under one very specific condition. Track 1 in the multicam sequence must be panned to center (0), which is incorrect for my workflow. Track 2's pan value appears to make no difference. Under any other pan configuration, including the correct one with Track 1 hard left and Track 2 hard right, waveforms do not display in the stereo sequence at all.Audio plays back and exports correctly under all configurations. This is purely a waveform display issue that appears to be triggered by pan position on Track 1 of the multicam sequence,

The honest truth is that I’m still experiencing frequent hanging, an average of a full minute, especially when accessing top menu items, after upgrading to 26.2.2.

System Specifications: Machine: Mac Studio Processor: Apple M1 Max OS: macOS Tahohe 26.3.1(a) Premiere Pro Version: 26.2.2 (Issue occurs here) / 26.0 (Stable) The Issue: After updating to version 26.2.2, the Program Monitor fails to refresh the image during playback. When I press "Play", the audio works perfectly, but the image remains static on the current frame. The visual only updates once I stop playback.Key Observations: Renderer Blocked: In Project Settings > General, the "Renderer" dropdown is greyed out and stuck on Metal. I cannot switch to Software Only or any other option. Hardware Decoupling: Even with "Hardware Accelerated Decoding" disabled in Preferences, the issue persists. UI Issues: Resetting workspaces or clearing media cache through the UI did not solve the freezing. Troubleshooting steps taken (failed): Resetting preferences on launch. Giving Premiere Pro "Full Disk Access" in macOS settings. Changing playback resolution (1/2, 1/4). Cleaning Medi

Im using premiere 26.2.0. But a lots of time its freezing. Thats not about what im doing. 

Atualizei o meu Premiere e ele não está suportando abrir um vídeo ou editar um gráfico de texto, edição de legendas entre outros que não eram para travar, já verifiquei os Driver's atualizei, desinstalei e instalei novamente tanto o BETA quanto o Premiere comum, para terem um contexto maior a configuração do meu Pc é amdR7, RTX 4050, Notebook Avell ion52r semana inteira com tela branca e eu preciso entregar 4 serviços, formatar o notebook não é uma opção pra mim.Estou a semana inteira tentando corrigir ou encontrar algo, porém todas as configurações acredito eu que estão corretasSteps to reproduce:    1. ... Result: ...Expected: ... System info    Application: Premiere Pro (Beta) v26.3.0.67    OS: Windows v10.0.26200, RAM: 31,74 GB GB, CPUs (logical): 16

Issue: Severe visual glitch (pink/purple block covering the bottom half of the frame) during playback of Canon C50 Open Gate .CRM files.Steps to reproduce: Import Canon C50 Open Gate Cinema RAW Light (.CRM) footage into a project. Add the clip to the timeline or preview it in the Source Monitor. Play back the footage with the Video Renderer set to Mercury Playback Engine GPU Acceleration (Metal). Here is screen capturehttps://drive.google.com/drive/folders/1fzr9rO6zlH1kBaeyd0443lkYmAFZI54l?usp=sharing Expected result: Smooth and accurate playback of the RAW footage without any visual artifacts or color distortion.Actual result: A massive pink and purple distorted glitch appears, covering the lower half of the video frame during playback.Workaround found: Downgraded to Adobe Premiere Pro version 25.0, where the footage plays back correctly without any glitches. Alternatively, in version 26.0.1, switching the Renderer in Project Settings to "Mercury Playback Engine Software Only" t

The system says my laptop is not compatible with this version of (beta) even if it meets the required specs needed.

Hi,I'm using Premiere Pro 25.2.3 on a Mac Studio M1 Ultra (128 GB RAM) with Mac OS Sequoia 15.4.1.  I use a QNAP NAS (3088XU-RP) wired over 25 GbE SFP28 cabling.  My read/write speeds exceed 2000 MB/Sec over SMB. I began a new project recently (as a Premiere Production) with approximately 100 hours of footage, all processed to proxies as ProRes Proxy codec within Premiere.  There are approximately 900 clips in the project that contains our media within the Production.  When accessed over SMB, Premiere Pro takes upwards of 10+ minutes to fully load the project.  Specifically on the background task of "relinking" every time the project is opened.  Once everything is finally loaded the performance is fine. But when I move all that media to an external SSD (APFS formatted) or even an iSCSI volume from the same NAS (effectively just a block level APFS volume over the network), Premiere Pro loads this project and completes the background "relinking" ta

Premiere Pro 25.4.0 on Win11. Today I discovered that my recent auto save files got stored in the wrong place. As long as just one project is opened, everything seems to be OK. But if you open a second project from a different folder, Premiere Pro starts putting the auto save files from the first project in the second project's folder. Even after closing the second project, premiere continues to store in that wrong folder.Luckily I was able to find the location of an auto safe file after my PC crashed. But it took me a while to figure out where they went. I sometimes open multiple projects to move clip preferences, effects or other things from one to another. Now I have auto save folders with mutliple states of up to four different projects. What a mess!

After creating Object Mask 01, Premiere Pro does not highlight or enable the options needed to create a second object mask. While Object Mask 02 is technically created, no overlay appears. To restore the subject highlighting, I have to save the project, close Premiere Pro, and then restart both the application and the project.

Issue: When using a MOGRT with audio the properties are only visible when selecting both video and audio clip in timeline. If selecting only the video-clip the properties are not shown in the properties-panel.Steps to Reproduce: Drag a MOGRT with embedded audio in timeline, select the video-clip. Properties are not shown in Properties-panel. You can’t edit Text, text properties or what ever. Select video and audio properties are shown.Expected Result: When selecting a MOGRT in timeline parameters can be edit in properties-panel, indipendent of selecting the audio clip.Actual Result: Parameters can only be edit when selecting both video and audio in timeline. When selecting only the video parameters are not shown in properties-panel. Properties-panel show sequenece-name instead of MOGRT-name.Screen Shot:only video is selected, properties-panel shows sequence namevideo and audio is selected, properties can be editPremiere Version: 26.2.2 (Build 3), bug is not available in Version 25.3Ope

You can’t change motion curve if you want an animation with motion blur using transform effect.  System info    Application: Premiere Pro v26.2.2    OS: Windows v10.0.26200, RAM: 31.82 GB GB, CPUs (logical): 24

 Timecode advances normally, but the displayed frame remains frozen until playback is paused. The same media plays smoothly in QuickTime. The issue occurs in a clean Premiere project and persists even at 1/16 playback resolution. Rolling back to Premiere Pro 26.0.0 restores full-resolution playback with the same media.

Issue: In Premiere 2025, I’m able to drag and move a clip in the Program Monitor, hold CTRL (or turn on snapping) and it will snap to the edge of another clip. This was very handy for aligning clips without manually entering values. In Premiere 26.2.2, clips only snap to guides or the edge of the frame.Steps to Reproduce: Open Premiere 2026 and add two clips to a sequence on different layers. Double click one clip in the program monitor, hold CTRL and drag to the other.Expected result: It should snap to the edge of the clip.Actual result: It doesn’t.Screenshot: PP 2025 version is 25.6.3 / PP 2026 version is 26.2.2Windows 10

IssueOpacity mask tools (pen, rectangle, ellipse) do not appear in Effect Controls for certain MP4 files in Premiere Pro 2026, even though the files are standard H.264 video clips and effects apply normally. This makes it impossible to mask Gaussian Blur or any other effect via Opacity, with no warning or explanation in the UI.Steps to reproduceIn Premiere Pro 2025 or earlier, export a sequence as an MP4 (H.264). Open Premiere Pro 2026. Import the exported MP4 file into a project. Place the clip in a sequence timeline. Select the clip in the timeline. Open Effect Controls and expand Opacity.Expected resultThe Opacity section should display mask tools (pen, rectangle, ellipse), allowing the user to draw and animate an opacity mask, consistent with other MP4 source footage.Actual resultThe Opacity mask tools do not appear at all. The clip otherwise behaves like normal media. Effects can be applied and keyframed. No warning, tooltip, or documentation explains why masking is unavailable. T

in adobe premiere i tried using generative extend on a video but i didnt like it so i removed it & came back later to try it again but it says you cannot use it twice on a clip even though it doesn't have any generative footage on it as i deleted it

I have about 100 creative LUTs. I can only choose down to about M in my list. Chosing anything beyond that doesn't work. Is there a limit to how many can be installed? If so, why? Mike

All other programs running perfect

I’ve seen this issue on old posts with no correct answers   On a pretty big timeline (4k mutlicam, 3000 + cuts), all the clips on the left side of my cursor have unlink it self from their audioThere was no “unlink”  in the history panel My computer has 32 Go RAM, Nvidia GeForce RTX 4060 and a 13th Gen Intel(R) Core(TM) i9-13900H, 2600 MHz, 14 cœur(s), 20 processeur(s) logique(s) I was able to recover some links by copy-pasting clips from auto-saves by it’s time consuming  As i was typing this, the “right side” did the same (It was linked just before, and going back with the history does not relink it)   UPDATE : Going back to my timeline, as I tried to play it I got this error:  Then no problems to play and edit 

Hi, Since the 26.0.0 release, new MOGRT-related bugs have been appearing with nearly every new version.  Bug 1: Since 26.0.0 release, Premiere does not recognize Lumetri effect inside MOGRTs at all - I have already reported this issue more than a month ago here - the post has a tag “Investigating”. Bug 2: Since 26.2.0 release, Media Replacement and other controls are not showing in MOGRTs that come with audio - this has been reported 2 weeks ago here - the post has a tag “Investigating”. I previously replied to posts from Community Managers to see whether there were any updates regarding these issues, but since I didn’t receive a response, I’m opening a new post to find out whether these bugs are actually planned to be fixed. While I understand Adobe can’t provide an exact timeline for fixes, I’d still like to know whether these bugs are at least acknowledged and intended to be addressed in the future. These issues are having a major impact on the MOGRT marketplace. I’ve received dozen

I just tried using it in Premiere and got a strange glitch that I can’t troubleshoot.I’m running Premiere 26.0.2 on a Mac.Screenshot attached illustrates the issue. The color fields stay regardless of rendering, timeline size, and frame rate.btw, it works fine in Premiere Pro 2025 and older versions. The issue is only with the 2026 version.Here is a link for the file: https://we.tl/t-QuN48F454DVPj6dm