Substance 3D Sampler

Does this herringbone pattern look right to you?  Sampler is the buggiest software I have ever used and the fixes take months if not years.  I end up spending countless hours trying to tweak and in the end it is unusable.  Please get your act together.

Hello, I’m running into an issue with the Substance 3D Sampler being unable to get past the splash screen. I’ve tried the latest version, version 5.0, and one of the 4.X versions and had the same issue on all of them. Until today when I immediately ran into the issue, I don’ think I had ever installed or launched Substance 3D Sampler before, and I did restart my PC between installations for both Sampler and Nvidia drivers.I tried deleting the contents of C:\Users\username\AppData\Roaming\Adobe\Adobe Substance 3D Sampler as mentioned in this thread,but the issues persisted.Here are some hardware/software specs as well as my log file.AMD R9 7950X3D, RTX 5080Using the latest Nvidia studio drivers, version 591.74Windows 11 Pro 25H2 , OS build 26200.7623

OK so I've been using sampler 30 for months now and I have test it extensively for hours on the most recent version of sampler as well as the other versions after 4.1.1. These three materials were created using image to material and the version 4.1.1.  After hours and hours of fiddling and playing around with the new options 5.1.0 gives us.. It gives us the options to choose what material we are scanning. For instance ground, ceramic, cement, etcetera. And each one of these are simply inferior to the 4.1.1 version of image-material scan. It did not have a specification for the material you were scanning. (by scanning I'm simply I2M). These results are profound we terrible and having just finished comparing the versions yet again I find it no easier to use and are as good as the I2M in Sampler v4.1.1. Please give us your have a "none" category. Bring back the I2M of S3Dv4.1.1 please. 

I have an educator account and am preparing to teach a game class next semster. I just learned that I can generate 3D models from photos using Substance 3D Sampler which would be great for my students. I downloaded Substance 3D Sampler but for some reason the actual procesture to convert images to a 3D Capture procedure is greyed out in the interface. Am I missing a step or did Adobe deactiveate this function from the software? It would be super useful it if worked.Thanks

Sampler 5.1 has been released and is there to make digitizing materials easier than ever before!   This new update introduces, among other things: New automatic tiling capabilities for structured or patterned materials Improved scan processing filters New layer stack capabilities New HP Z Captis support features   Discover more about the features here, and the full release note here!

Sampler is not loading anymore after a crash on Windows 10. I've tried un-installing through Adobe CC, re-installing, restarting, using IObit to uninstall again, re-install again and I'm unable to launch the program. Pretty much stuck. Any help is appreciated!

I´m using panels. fasteners are off but they still bleed and gap in not working. its not alligning correctly  

Im creating basic image to texture fabrics for renderings of furntiure. Really only need diffuse, specular, roughness and normal. I think im missing something. I can't ever seem to get the vivible pattern to go away.  Tech notes:- Mac studio with M1 Sonoma 14.6.1. Any tips? Thanks,MDW

A couple month ago I tried to use Sampler AI  to do something I codn't find in texture libraries . A racing track curbs.  Got nothing  really useful unfortunately  , always wrong scale, never an exact size I ordered. Tried to turn actual photo  into material - Sampler did it  no better than old style crazy bump . Brighter pixels are  higher and that's all .         Tried it for  a grass edge , a bit better  but still quite bad .  I very much would like to figure out what   kind of materials and in what cover scale  it is trained to work ? I see it works nice for small 1x1m  textures of artificial materials with man made  patterns .  Right?   Would it be a better idea  to generate  an image of proper size  in Photoshop   or elsewhere  and bring  to Sampler  for image to material AI only?  It seems as

Hello Adobe Support,I have been experiencing a persistent issue with Substance 3D Sampler 5.x on my system, and after extensive troubleshooting with NVIDIA support, the issue still remains unresolved.Problem Summary:Sampler 5.x works correctly right after a clean Windows installation.After 1–2 weeks of use, the application suddenly fails to launch.Version 4.5.2 works without any issues.Event Viewer consistently shows errors related to vulkan-1.dll during the crash.The issue only affects Adobe applications (Sampler and Designer). All other games and applications using Vulkan run without any problems.Steps Already Taken:Multiple clean driver installations (both Studio and Game Ready drivers, using DDU and NVIDIA Cleanup Tool).Tested on both Windows 10 and Windows 11 – same issue occurs.Performed multiple full OS reinstalls (4+ times) and confirmed the same pattern:Works after a fresh install → fails to launch after some time.Tried with offline local Microsoft account (not cloud-linked).D

I have been capturing materials with the z captis scanner.  While I dont have a lot of experience with sampler, I have been using substance and designer for a few years.  I get this extremely odd error when I try applying the auto tiling feature to my scanned materials - all colors are converted to red in some way (attached examples)I cant tell if this is an issue with captis, sampler or maybe even my graphic card.  Im using the latest version of sampler and I checked that I have the latest updated drivers for my graphic card.

I don't really know how to describe this correctly but basically after opening an image to be converted to a material using AI I can see it loading but once it's done I'm just left with a black mesh and no textures whatsoever 😕😕 This is on windows 10, RTX 3070ti laptop

 So I recently tried out the 3D Sampler free trial Adobe was offering and I tried it once and now I want to get rid of my free trial before it starts charging money. Whenever I try to cancel it, it keeps giving me an error. Look at the image to see what it says.

I am creating a material from an image of a megascans rock, then exporting Unity HD Standard material maps.  For some reasons, the basecolor map is much darker than the original image and is unsuble in unity for that reason.  The weird thing is that out of about 10 images, this is happening to 6 of them and the other 4 Re exporting with the normal color vibrance as the original.  What would make a basecolor/diffuse/albedo map export darker?  I tried numerous export settings of PNG, Targa and JPEG and every preset exports these dark basecolor images.  Any help would be greatly appreciated!  Thanks.

Hello, Thanks in advance for any quick steps on how to make a wood floor cheveron pattern in sampler? Please note that I downloaded a non pattern .sbsar wood from substance source, and I want to make that into a Cheveron Wood Pattern.  Attached in an example of the chevron pattern. Thanks,Sandra

Hello,After updating to Substance 3D Sampler 5.1, I noticed that the 3D Capture feature is now disabled with the message “The 3D capture feature is no longer supported.” What makes this even more confusing is that the Creative Cloud product page for Sampler still lists 3D Capture as a main use case, complete with description and promotional images — which suggests it’s still available in the latest version, while it’s not. To make things worse, there’s currently no official way to install version 5.0 (or earlier) anymore:The “Other Versions” option in Creative Cloud doesn’t list it.The Help Center has no download links for older installers. Why the 3D Capture feature has been disabled?Can you provide an official way for users to install Sampler 5.0 (or earlier) if they still need 3D Capture? This would help a lot of users who rely on this workflow. I already posted a short comment under the “Substance 3D Sampler 5.1 has just been released!”

Align matterials patterns by painting is created.  Get error after adding Auto Tilling. What is going wrong? Do i need to use it after importing Material?   Also how this work? If you're planning to create a tiling material from an image, it's better to use the Auto Tiling filter first, and then use the Image to Material filter.    

hello, ive come across an issue regarding importing/viewing materials inside of sampler, like others i too was also effected by the nvidia driver problem, im wondering if its still because of that? ive tried exporting the material to see if anything got exported and only got a roughness mapthxs 

Hello, I have a problem with the visibility of the mesh. Every time I create a new project I can't see the mesh and materials on the viewport, everything is black, both in the 2d and 3d view, the only thing I see is the grid.The version of Sampler is the latest available and I use windows. The problem occurs with both New Project and Empty Project

Hi everyone, I just downloaded this program after several years of not using it, and everything I added is constantly black. What's going on? Is it my drivers? Is there an incompatibility issue?Thanks!  

Is it possible to create translucent materials in Sampler? I have set the translucency slider to 1 with path tracing enabled but nothing happens? 

I am trying to use the API to automate processing of a directory containing some images. I need to set the category under the "basic parameters" section. How can this be accomplished?