Bug Reports

Hi,I'm using Premiere Pro 25.2.3 on a Mac Studio M1 Ultra (128 GB RAM) with Mac OS Sequoia 15.4.1.  I use a QNAP NAS (3088XU-RP) wired over 25 GbE SFP28 cabling.  My read/write speeds exceed 2000 MB/Sec over SMB. I began a new project recently (as a Premiere Production) with approximately 100 hours of footage, all processed to proxies as ProRes Proxy codec within Premiere.  There are approximately 900 clips in the project that contains our media within the Production.  When accessed over SMB, Premiere Pro takes upwards of 10+ minutes to fully load the project.  Specifically on the background task of "relinking" every time the project is opened.  Once everything is finally loaded the performance is fine. But when I move all that media to an external SSD (APFS formatted) or even an iSCSI volume from the same NAS (effectively just a block level APFS volume over the network), Premiere Pro loads this project and completes the background "relinking" ta

Issue: When using a MOGRT with audio the properties are only visible when selecting both video and audio clip in timeline. If selecting only the video-clip the properties are not shown in the properties-panel.Steps to Reproduce: Drag a MOGRT with embedded audio in timeline, select the video-clip. Properties are not shown in Properties-panel. You can’t edit Text, text properties or what ever. Select video and audio properties are shown.Expected Result: When selecting a MOGRT in timeline parameters can be edit in properties-panel, indipendent of selecting the audio clip.Actual Result: Parameters can only be edit when selecting both video and audio in timeline. When selecting only the video parameters are not shown in properties-panel. Properties-panel show sequenece-name instead of MOGRT-name.Screen Shot:only video is selected, properties-panel shows sequence namevideo and audio is selected, properties can be editPremiere Version: 26.2.2 (Build 3), bug is not available in Version 25.3Ope

You can’t change motion curve if you want an animation with motion blur using transform effect.  System info    Application: Premiere Pro v26.2.2    OS: Windows v10.0.26200, RAM: 31.82 GB GB, CPUs (logical): 24

Issue: In Premiere 2025, I’m able to drag and move a clip in the Program Monitor, hold CTRL (or turn on snapping) and it will snap to the edge of another clip. This was very handy for aligning clips without manually entering values. In Premiere 26.2.2, clips only snap to guides or the edge of the frame.Steps to Reproduce: Open Premiere 2026 and add two clips to a sequence on different layers. Double click one clip in the program monitor, hold CTRL and drag to the other.Expected result: It should snap to the edge of the clip.Actual result: It doesn’t.Screenshot: PP 2025 version is 25.6.3 / PP 2026 version is 26.2.2Windows 10

IssueOpacity mask tools (pen, rectangle, ellipse) do not appear in Effect Controls for certain MP4 files in Premiere Pro 2026, even though the files are standard H.264 video clips and effects apply normally. This makes it impossible to mask Gaussian Blur or any other effect via Opacity, with no warning or explanation in the UI.Steps to reproduceIn Premiere Pro 2025 or earlier, export a sequence as an MP4 (H.264). Open Premiere Pro 2026. Import the exported MP4 file into a project. Place the clip in a sequence timeline. Select the clip in the timeline. Open Effect Controls and expand Opacity.Expected resultThe Opacity section should display mask tools (pen, rectangle, ellipse), allowing the user to draw and animate an opacity mask, consistent with other MP4 source footage.Actual resultThe Opacity mask tools do not appear at all. The clip otherwise behaves like normal media. Effects can be applied and keyframed. No warning, tooltip, or documentation explains why masking is unavailable. T

All other programs running perfect

I’ve seen this issue on old posts with no correct answers   On a pretty big timeline (4k mutlicam, 3000 + cuts), all the clips on the left side of my cursor have unlink it self from their audioThere was no “unlink”  in the history panel My computer has 32 Go RAM, Nvidia GeForce RTX 4060 and a 13th Gen Intel(R) Core(TM) i9-13900H, 2600 MHz, 14 cœur(s), 20 processeur(s) logique(s) I was able to recover some links by copy-pasting clips from auto-saves by it’s time consuming  As i was typing this, the “right side” did the same (It was linked just before, and going back with the history does not relink it)   UPDATE : Going back to my timeline, as I tried to play it I got this error:  Then no problems to play and edit 

Hi, Since the 26.0.0 release, new MOGRT-related bugs have been appearing with nearly every new version.  Bug 1: Since 26.0.0 release, Premiere does not recognize Lumetri effect inside MOGRTs at all - I have already reported this issue more than a month ago here - the post has a tag “Investigating”. Bug 2: Since 26.2.0 release, Media Replacement and other controls are not showing in MOGRTs that come with audio - this has been reported 2 weeks ago here - the post has a tag “Investigating”. I previously replied to posts from Community Managers to see whether there were any updates regarding these issues, but since I didn’t receive a response, I’m opening a new post to find out whether these bugs are actually planned to be fixed. While I understand Adobe can’t provide an exact timeline for fixes, I’d still like to know whether these bugs are at least acknowledged and intended to be addressed in the future. These issues are having a major impact on the MOGRT marketplace. I’ve received dozen

I just tried using it in Premiere and got a strange glitch that I can’t troubleshoot.I’m running Premiere 26.0.2 on a Mac.Screenshot attached illustrates the issue. The color fields stay regardless of rendering, timeline size, and frame rate.btw, it works fine in Premiere Pro 2025 and older versions. The issue is only with the 2026 version.Here is a link for the file: https://we.tl/t-QuN48F454DVPj6dm

Title: TrackItem.createSetInPointAction does not persist across save/reopen for video tracks (UXP API, Premiere Pro 26.2)Affected API: ppro.TrackItem.createSetInPointAction(tickTime) and likely createSetOutPointAction(tickTime)Description:Calling trackItem.createSetInPointAction(newInPoint) from UXP on a video TrackItem and executing the resulting action via project.executeTransaction() successfully changes the in-point in-session. After saving the project, closing, and reopening, the in-point reverts to the source clip's original in-point.Scope:Reproduces on all video TrackItems — confirmed on both regular source clips and multicam nested sequences Does not reproduce on audio TrackItems — createSetInPointAction on audio persists correctly Does not reproduce via native razor — manual razor (C key) and Option+Up move both persist on video Track locking (🔒) does not change the behavior — in-points still revertOther persistence behavior on video (for reference):createMoveAction — persist

When consolidating a project with the Project Manager, AI-generated parts are not included/copied with the consolidated project. This causes missing media or incomplete sequences when opening the consolidated project afterward.

Spell Checker in Premiere Pro not working at all when reviewing captions in the text function. Despite newer versions in both premier and macOS coming out the problem continues. Help?Premeir Version 26.0.1 (Build 3)Apple M2 Max 96GB MemorymacOS Tahoe Version 26.3 

I just downgraded my gpu driver to this.AMD Software: Adrenalin EditionRevision NumberAdrenalin 26.3.1 (WHQL Recommended)File Size908 MBRelease Date2026-03-19 And now Encoder detect and use my dedicated GPU.  

I have just upgraded to v26 of Windows 11, but I can't use the new object mask function on it. I also can't use the other mask. Expected ResultI can see the selected result by using the object mask . Actual ResultNo result has been detected or selected.

Hello,I have made several Team Projects for my employees to work on several different projects. However, whenever I try to invite my employees, Premiere is no longer sending the invitation. It does not even show the dialog box for invitation email progress.  They can send me an invite to projects they create, but I am unable to send them an invite on projects I create.

When expanding window to full size it creates a blurry render of the clip in program monitor

Two bugs: Project bin will randomly (after various periods of time) no longer accept any drag and drop movement or additions of assets. I receive the mouse icon for "unable to complete". A second bug, that also seems to occur at random, is that my source window video will become pixelated and oversaturated. It happens across multiple projects and no matter which footage is loaded into the Source window. Restarting Premiere seems to fix both, until the next time they occur. Neither bug occurred prior to 5/15. v 26.2.2 (Build 3) running on a M4 Max MacBook Pro, Tahoe 26.5

HI,I have reported an issue with Premiere Pro and Audition, but now I am encounter a problem with Premiere and Media Encoder. There doesn’t seem to be a way for me to easily view the clips I am sending to Encoder from source point in to source point out. I have used ai to try and resolve the problem to no avail. This is all very frustrating, but I know that I have had a lot of expectations met with Adobe products in the past. Even so, I must report this, as it is consuming way too much of my time to do simple things which are now complicated. I am not a big-time user of Encoder, but I have learned about it and it appears to be a very good tool for doing some of the things that would be helpful to me. The problem is as stated above, the specs are:I set in/out source points on a project in Premiere, went to export, sent the file to Media Encoder and made sure it was set to source in/out, but the whole project shows up in the source player, and there is no way to view the video in the out

Updated to v26.2.2 yesterday after it crashing in previous version - now I'm getting error code that: Adobe Premiere Pro 2026” is damaged and can’t be opened. You should move it to the Trash. This file was downloaded on an unknown date." I don't want to uninstall all my presets and reinstall for this annoying error that I've never encountered before after 10 years. Even clicking the messages uninstall doesn’t do anything so it’d have to be an uninstall from the applications. Please advise so I can move client projects forward

For bins with lots of clips in them, Set Poster Frame can be invaluable in quickly seeing which clips are which, as many of the clips I work with start with black, so the default Poster Frame of the first frame of the clip isn’t useful. I used to have no problem using Set Poster Frame. However, now, whenever I try to use it, nothing happens. I upgraded to PP 2026.0.0 and it still doesn’t work. I’m on a MacBook Pro M2 Max 2023 OS 26.3.

See the video. Steps to reproduce: add a 1920x1080 imageonto a 1920x1080 project timeline, reduce the scale. At 49% the image jumps and becomes much smaller. Premiere Pro v.25, all the settings reset, caches cleaned. It's on CUDA and OpenCL in 14700K+4080 On Mercury all is OK