Resuelto

Hello community,I opened a .aep file that I hadn't opened in 2 to 3 months. Upon launch, I didn't receive any message indicating missing files, and I don't have any Photoshop files. However, when I start the preview, it works for a while then abruptly stops and displays an error message.I cleared the cache, uninstalled and reinstalled After Effects, updated Camera Raw, but to no avail.I'm lost because I can't seem to solve this problem. I've searched everywhere on the internet and haven't found a solution to my problem, so I hope you can help me here. Thanks in advance.

Hi all! So, I have been having this weird problem while I am using the media replacement option in Mogrts. Whenever I try to to replace more than one video in the respective mogrt, apart from the first video, all the subsequent ones come out as black and white, regardless of  their actual color. So far I have tried everything, but have been unable to figure the reason or the solution to this problem. Basically, it has stopped my work dead in its tracks. Any, insight or clue towards solving my problem will be very helpful.

I recently shot the finish line of a marathon for some 7100 imagesApprox 40 were out of focus so I flagged them as rejected and put them in a seperate folder.I used the Focus Point plugin for LrC to see what I was aiming at and sure enough the problem was me. I somehow stumbled across Black Forest Lab's Flux Playground website and ran those out of focus images through it, using this prompt:"Improve this image and put the subject in clear focus and blur the background like an f2.8 lens". It did exactly as instructed and runners who were totally out of focus, were generated clearly, other than some of the illegible text on their bibs remaining garbled. The background f2.8 simulation was nearly as good as I could get from my 70-200 lens. OK ...I've used PS for over 20 years and it has generative Ai so I thought I'd try that on some of those photos just as a test. Using the same prompt just produced absolute garbage, so I tried first selecting the subject onto its own layer

I am using Premiere Pro on Windows 10. I am editing a vertical video and I changed the program monitor to 9:16 aspect ratio however when I open any clips in the source monitor panel, the monitor is set horizontal 16:9. I applied a 'transform' master clip effect to the files to get them in the right orientation but that doesn't make the source monitor flip. How do I do this? Thank you.

Hi, I have noticed that PPRO unpredictably scales/crops to fit to sequence's resolution dragged adjustment layerso adjustment layer of 1920x1080 dragged into 640x320 or 1280/720 seq becomes 640x320 or 1280/720 accordinly,  scaling from lower than 100% shows that the layer gets croppedwhile for 4k footage it doesn't upscaleI am building script that has to set adj layer scale in accordance with the seq's resolution, but cannot get to understand how to ensure the scale is correct as there is no way to extract real clip's box  

I've been using Adobe Spark Video and Adobe Express for years. It is by far the best (and easiest-to-use) digital storytelling tool I've ever used with elementary students. It is so intuitive that I can give it to a 5 year old and they can make a video. I just looked at the new Adobe Express. I see that there is a video editor tool, but nothing that replaces Adobe Spark Video. Does anyone have any suggestions? Is the Adobe Spark Video app going to be discontinued? It is literally my favourite app to use with students 😞

Trying to wrap my head around this new error I have popping up trying to send an email. This seems to have worked through update 19. I cannot speak for Update 20 because we updated to 20 and then 21 within a few days of each other. I am running the latest approved JVM 11.0.27 from Adobe's site, on Server 2019.  Below is the error I am seeing when I try to send. The page does not end up doing a redirect, but hangs after submit.  Running out of ideas for how to resolve, I have followed another Adobe post but that didn't work either so I reverted back to the old bouncy castle: Solved: CFMAIL Stopped Working After CF2018 Update 14 - Adobe Product Community - 13035484Any suggestions would be welcome, thanks!Jul 10, 2025 12:21:07 PM org.apache.catalina.core.StandardWrapperValve invokeSEVERE: Servlet.service() for servlet [CfmServlet] in context with path [] threw exception [Servlet execution threw an exception] with root causejava.lang.VerifyError: Bad type on operand sta

I hope someone can help me here.  I am JUST now learning about 3D normal maps and was happy to see that my beloved Photoshop can do this trick.  The issue I am facing is everytime I go to try and create a 3D Normal Map of my image I get the following error..."The 3D features require that "Use Graphics Processor" is enabled in the Performance prefrences.  Your video card must meet the minimum requirements and you may need to check that your driver is working correctly." "Use Graphics Processor" - is enabled and still no joy. PC Spec:GeForce RTX 4070 Ti 64gb RamRyzen 7 7800X 3D 4.2ghz Is there any way around this never ending error?  

My IMac which I bought in 2018 says that I need macOS 14.6.1 or later for maximum performance. Does that mean that  all my colors in my projects will be different when printed off? Do I have to buy a new Imac?   If I buy a new Imac and upload all three of my Adobe apps ( Illustrator, Photoshop and Indesign) will my projects be able to have the correct colors or do I have to scan and enter all my illustrations all over again to get my correct colors in my illustrations?  

Mon crédit de génération mensuel vient d'être réactivé. Je suis sure de ne pas l'avoir utilisé avant vu que je faisais littérallement refresh sur le site pour pouvoir travailler à la minute où je serais créditée. Je suis à 1000 /5000 hors il a même pas 10 minutes, je n'avais pas de crédit

Arabirim sütunları çalışma alanında kayıtlı oldan değişikliği yoksayıyor ve programı her açtığımda sütunlar daralmış olarak karşıma çıkıyordu. Bu nedenle manuel olarak genişletmem gerekiyordu. Ben de bu sinir bozucu bug ı araştırırken topluluktaki bir arkadaşın durumu yaşadığını ve çözüme kavuşturduğunu gördüm. Denedim ve işe yaradı. Hiç bir türkçe kaynak olmamasından dolayı da buraya bilgilendirme yapıyorum.  "Sanırım bu hatanın nedenini ve muhtemel çözümünü keşfettim.Bu sorun, geri yüklenmiş/en büyük olmayan pencere boyutunuz, araç çubuklarının genişletilemeyeceği kadar küçük olduğunda ortaya çıkıyor gibi görünüyor (bkz. ekli görsel). Bu durumda tüm araç çubukları küçültülüyor (profilinizi sıfırlasanız bile). Daha sonra pencereyi büyütüp profilinizi geri yükleyebilirsiniz, ancak bir sonraki Photoshop açılışında, araç çubuklarının küçültülmüş durumunu hatırlıyor gibi görünüyor (tam ekran başlasa bile). Bunu açıklamaya çalışacağım, aynı sorunu yeniden oluşturup oluşturamayaca

how to edit essential graphics templates text in premiere pro 2025?

Hello I'm new to Fresco, and I need some help,p please. I'm trying to convert my procreate brushes to the Adobe Fresco app, but when I tried to add a brush, it seems the Procreate Brush files aren't appear to shown of any files. I don't know what I did wrong. I did message the assisnt support for help to me with brush files, and they told me to export Procreate brushes or brushest files to Fresco but..nothing is working? Is there something I did wrong?

I do not recall this being an issue before updating to Windows 11, but now when myself and other team members in our organization tries to combine more than 16 files using the right-click context menu and choosing "Combine files in Acrobat...," Acrobat only brings up the first 16 files and then ignores the rest. The function still works if we ask Acrobat to combine the files from within the program; the behvavior seems limited to the context menu option within File Explorer. Is there a setting or something that can eliminate this bottleneck?

A los 7 días de mi prueba gratuita, Adobe me ha cobrado 24 euros.Cuándo me devolvereis el dinero? Eran 14 días de prueba gratuita!!

Last week, when I tried to open certain pdfs using Acrobat Pro for Mac it would not display the text - just the header and some formatting lines and bullet points etc. I could open the documents fine in other apps (e.g. Preview and Google Chrome), and it was fine in Acrobat Pro for Windows. I discussed this with an Adobe professional last Friday, who was very helpful. He told me it was a known bug that would be remedied in the next version. He told me it could be fixed for now by reverting to the previous version, which he patiently set up for me through gaining remote viewer access to my machine. It took quite a while, as some large files had to be downloaded and various settings/files had be removed or altered. This seemed to fix the problem. However, the problem has re-appeared today (the following Monday). This is very frustrating. Adobe needs to fixed this as soon as possible, as my subscription is useless in the mean time.

Hi thereI work for a scanning company, for the last month or so when i finish scannaing a paper document and then scan large format drawings in a large scanner and then inserting them into the pdf file, the memory usage keeps rising until everthing crashes, is there any solution to stop this.Thxversion 2025.001.20577 64bit 

I have found that Adobe form builder is almost un useable now.  Just a couple of issues, text on page grouping so you can't move text around without creating read only text boxes or to move a checkbox without resizing it you have to zoom in.  Not to mention how slow.  I have spent half a day building a very simple form and I have just given up.  Maybe there is AI in the system now 

I need to have an employee sign the documents as well as HR under "Send in Bulk" in classic view. How do I add HR's signature? 

Bonjour, comment ne pas perdre les raccourcis clavier créées aux mises à jour de Photoshop ou Illustrator, beaucoup de temps perdu et d'énervement générés !

And at the top of the document it says "The validity of the document certification is unknown. The author could not be verified." Can anyone help with this?

I know previously there was a way to specify when saving photos for web to have the filename lowercase. The only thing I can find now is to make the extension lower or uppercase (in preferences), or in the SFW output settings, there are options for different filename setups, but nothing for prompting lowercase. Any ideas? Am I just missing it?Currently, the SFW file is pulling my document name.I'm on Windows 10, using PS 2025 - 26.7.0 

I run Lightroom Classic on my desktop (pc) and a laptop (mac air). My primary catalog is on my desktop and the catalog for my laptop is in OneDrive. Previously I had a windows laptop with the catalog in OneDrive and was able to import the laptop catalog, from OneDrive, into the primary instance on my desktop. Now when I try to import from the laptop catalog (from mac) in OneDrive into my primary desktop (pc), I get an error that says 'Lightroom could not import this catalog because of an unknown error.' Previously when I was using a windows laptop, it worked great but now it is erroring out. Catalog runs great on the laptop, just the import is struggling. Any ideass and/or suggestions welcome.

So, I have some text I created.. then later created the geometry for the path I want it on. Is it possible to somehow 'move' that text onto the path?

I have an issue and I don't seem to get rid of it.When I open a .PSD file (Windows 11) it will open in Fresco.The icon of the file is Photoshop. When I say PSD's have to be opened with another program, I have to look for Photoshop.exe and even then, it doesnt work and doesn't show the Photoshop thumbnail. Anyone with a solution? 🙂