Beantwortet

Je voudrais exporter un carnet en pdf pour qu'il soit envoyer en impression mais l'imprimeur demande un pdf avec déjà déjà la présentation en piqûre de cheval. Je n'arrive pas à imprimer le cahier en pdf ...    

I somehow downloaded and installed Adobe DC as a purported upgrade to the existent Acrobat Reader installed in my laptop.The DC app has been a disaster for me in terms of generating extra work and convoluted navigation.Also, I do NOT trust nor want a cloud-based app due to profound, and hard-learned, concerns about privacy and security, plus occasional loss of online connectivity and access, which exigency can make me SOL in terms of using such an external cloud-based app.Questions:[1] How can I save a downloaded and opened PDF file directly into my laptop, versus saving file in the cloud and then copying into laptop folder? That multi-step process inside DC is a frustrating PITA, as Adobe Acrobat Reader had been sufficient for my purposes. [2] Alternately, can I delete DC and install current version of Adobe Acrobat Reader, which is fine and more user-friendly for my needs, and much, much more secure?Many thanks in advance for readers' attention and timely advisement & assistance.

Hi community,I'm a non-commercial user and most of the time, I only need LR, LRC and LR Mobile. I now see that I have 2 subscriptions in parallel which I didn't think was possible:- Creative Cloud Photo subscription where LR is bundled with PS (about 25 bucks/mo)- LR 1 TB subscription (which is all I need, about 15 bucks/mo) I think this is because LR was nagging me erronously that my subscription was running out, and in my anger I must have purchased a 2nd subscription - I didn't think this was possible as I now have a dual LR subscription for a royal 40 bucks/mo... How can I get rid of the "big" PS subscription without paying the penalty fee? Cheerstotality1000 

Please add the ability to disable trials entirely from Adobe Creative Cloud Desktop.We cannot allow users to install trials per policy, but Adobe is pushing use of Creative cloud for deploying so many of the apps that it's basically impossible to manage without it.We need the ability to only show apps which have been pre-appoved for use (that we decide, not that Adobe wishes to advertize)

What technique is this? PLEASE HELP! Hey guys, we have this film festival coming up and I'm really trying to figure out how these guys did this editing, if anybody could give me any leads, I would appreciate it so much!The effect is sort of like a dragon, Ball Z/bullet time effect. Video Dragon ball Z sequence concept: https://www.instagram.com/reel/DOmEr5TEQIu/?igsh=aGR5OXd0ejl3amEx Here's another example https://www.instagram.com/reel/DNY5dGLxp49/?igsh=MTVldXU2cnZiemg4OQ==  did the actors pretty much do the fight sequence and then they slow down, as the camera moves? are the guys jumping up and flying in the air sort of like a rotoscoping and then key framing?  I'm fairly familiar with Premier, and slightly less so with after effects, but usually I stick to simpler effects. thank you in advance for all of your help guys! 

Hello together, i need your help to append my title with a word "webshop". example: current title: car 01 new tittle: car 01 webshop   I have the code but it doesn't work:   #target bridgeif( BridgeTalk.appName == "bridge" ) {FT = MenuElement.create("command", "Add Webshop to Title", "at the end of Tools");}FT.onSelect = function () {AddWebshopToTitle();} function AddWebshopToTitle(){var thumbs = app.document.selections;if(!thumbs.length) return;if (ExternalObject.AdobeXMPScript == undefined) ExternalObject.AdobeXMPScript = newExternalObject("lib:AdobeXMPScript");for(var a in thumbs){var selectedFile = thumbs[a].spec;/*var Title = decodeURI(selectedFile.name).replace(/\.[^\.]+$/, '')//([0-9/[-].jpg/]*) nur name*/var webshop = "Webshop"var myXmpFile = new XMPFile( selectedFile.fsName, XMPConst.UNKNOWN,XMPConst.OPEN_FOR_UPDATE);var myXmp = myXmpFile.getXMP();/*myXmp.deleteProperty(XMPConst.NS_DC, "title");*/myXmp.appendArrayItem(XMPConst.NS_DC, "title", webshop, 0,XMPConst.ALIA

There's a great feature in the Insert Photos tool on the forum that allows you to browse through your Saved Photos.  There is even a section called My Albums. Unfortunately, I don't see and can not find any way to edit these albums. I thought it would be somewhere in my Profile. It would be a great time saver if the albums could be edited like you can edit the Macros. It would make my life easier.

After the latest update to CC 2019, when I open an ai file, it launches Photoshop each time instead of Illustrator. Why?

I got another adobe acrobat charge this morning and I have no active plan, I have nothing and I wanted to know if there is a way to contact them again since this is the 3rd time they have charged my card, so please help me maybe contact themI got another adobe acrobat charge this morning and I have no active plan, I have nothing and wanted to know if there is a way to contact them again since this is the 3rd time they have charged my card, so please help me contact them for a refund.

Hello,My vector submissions have been pending for approval for 4 months now. Previously, my vectors were typically approved within 15 days, and some were even approved on the same day. My rejection rate is only 2 out of 100, so I’m unsure why there’s such a long delay this time.Can someone please advise me on what I should do?

Hi, I just installed Adobe Acrobat DC, My problem is that when I'm in a meeting on Teams I can't share the PDF window. Does anyone have a solution?

I was sent an email which stated that my 'Payment has failed' for my creative cloud pro plan, but looking on my adobe account there is no creative cloud pro plan on the website, neither is there any orders or invoices on the account that was sent the email. The only plan I have on that account is adobe express for my school, which is not the creative cloud pro plan and is something I do not have to pay for. Can you check my account for this plan or something, as I have no idea where there is any evidence of me having this plan. If it is possible can you cancel, as I already have the adobe enterprise for schools. There is just no mention of this plan anywhere on my account, no any billing outside of the fact it has already taken money out of my bank account and the email which was sent to me saying tha payment failed due to there being not enough money in the account.

Poderia ter uma função de legenda automática nativa no Premiere Rush, assim como o software do PC já tem e vários outros apps de edição como o CapCut já tem também, seria indispensável esse recurso no Premiere Rush que tá muito bom.

Hello.I am experiencing very slow rendering times when exporting an AfterFX project via Adobe Media Encoder.The project duration is quite long at 20-30 minutes, the first 15 - 30 seconds are quite effect intensive but then loop repeatedly for the remainder of the duration. During the first 15-30 seconds of effects the CPU goes closer to 100% (around 70-90%) but after that trickels down to barely 50%. GPU sporadically spikes to about 40% but mostly stays at very low utilization anywhere from 10 - 25%. Memory is stable at arund 42-45%. I do not use aftereffects often but use premiere pro a lot more. I notice rendering premiere pro projects is infinitely faster and takes a fraction of the time AfterFX projects take. I'm wondering why AME refuses to utilize the full power of my machine to speed up these renders. A 30 minute export takes over 3 hours. I am aware I can just render the first 2 minute long section and then loop stitch together a loop in Premiere Pro and render that and it woul

Hi all, I've found variations of this but nothing that hits the spot quite as I need. We use InDesign to design and mockup web page and email designs and subsequently pass on the image assets to our developers to build a HTML page with. Some times we cheat image backgrounds extensions with subtle stretches and re-group, so I need the group to export exactly how it appears in InDesign but as a single JPEG. I'd like a shorcut triggered script that exports all selected objects, including grouped ojects, as individual JPEGs at max quality, at a predefined resolution (in this case @15739213, so 144ppi) and be able to define the save location (though straight to Desktop would be good enough). The below script kind of works but it only exports the groups and breaks the groups down in to individual images. I'd love to learn how to edit this to achieve what I need. Thanks in advance to any that may be able to help.  test(); function test(){ var myDoc = ap

My files have been in review for 12 weeks, can you check the status?

Not sure what's wrong with my setup but when i double click any image in my timeline, it shows up cropped in my Source Monitor. I've never seen this happen before, is this normal? How can I make sure that when I double click my images in the timeline, they show up in the source monitor fitted into the frame instead of cropped off? 

Hi,Asking for a friend (> English is a problem > Dutch).Windows 11, with Bridge and Photoshop installed and fully up to date.After opening a jpeg for the second time in Photoshop (via Bridge or not via Bridge) he has a weird toolbar on the left with dots (the tools are there but not showing) and the masking tool selected.Opening a RAW file via Bridge to Camera RAW and then open it in Photoshop gives no problem with the toolbar.What we did to solve it:*Ctrl+Alt+Shift as we launched Photoshop to reset your preferences to their defaults.  (did the same with Bridge, just in case).* Created a new workspace with the toolbar intact (but it does not show up after opening jpeg for the second time in Photoshop.* Reset the settings of the toolbar to its default (in the preferences.) We Googled but did not find a solution.  Any Ideas what could be the problem or how to solve this. I suspect a bug... Best regardsReina

 The images don't show up on my laptop.I can access and edit it in my phone but not on my laptop. please help.

 안녕하세요 클튜에서 작업 후 에펙으로 넘어와 보정하는 애니메이터입니다클립스튜디오 애니 파일은 targa로 내보내기 하며며에펙으로 가져올때도 targa sequence로 가져옵니다이렇게 잘 사용하고 있다가 어느날 import를 하면 저렇게 창이 뜨고 무한로딩이 걸립니다..마우스를 눌러도 오류 띠딩 소리만 납니다..혹시 해결법 아시는분 있을까요? 대학 입시 포토폴리오를 제작중인데 마감일이 일주일채 남지 않았어요아시는분 계시면 빠른 답변 부탁드리겠습니다!! ㅜㅜ

Active la prueba gratuita de 3 productos de adobe (photoshop, after effects, premier) y el dia 7 de la prueba intente cancelar pero no me dejaba, asi que lo deje en el aire, luego de que me cobraron, cancele la subscripción y en la factura decia que me iban a hacer un "reembolso prorrateado" donde me iban a devolver una cierta cantidad del dinero en 5 dias, y ya ha pasado casi un mes y no me devuelven por otro lado el asistente virtual no puede resolver mi queja ni me pone en contacto con un asesor.

I don't even know how to describe this, but I'll attempt to. Please look at the video included.I make a blend between two objects. I isolate and edit the blend object directly. I move one of the objects to where I want it to be. The object snaps to a random point beyond where it should go. If I hit CTRL+Z, it will go to the new placement that I originally wanted. CTRL+Z is now reset, so any edits made before this point cannot be undone. You cannot go back any further.Basic Troubleshooting:Snapping has been turned off in all instances (all known snapping).This is in a new document on a newly opened Illustrator.Program/System Details:Illustrator 29.8.1 (64-bit)Windows 10, latest patches and updates from MS as of 9/16/25RTX 3080 12GB64GB DDR4Intel 12700K

Hey Photoshop users! Have you encountered the dreaded “Scratch Disk Full” error? It can seriously slow down or even crash your workflow. I’ve compiled a few tips to fix it:✅ Free Up Space – Delete unnecessary files to clear storage. ✅ Change Scratch Disk Location – Go to Edit > Preferences > Scratch Disks and select a drive with more space. ✅ Clear Cache Files – Use Edit > Purge > All to remove temporary data. ✅ Limit History States – Reducing undo steps in Preferences > Performance can free up memory. ✅ Upgrade to SSD – If possible, an SSD dramatically speeds up scratch disk usage. Have you found other solutions that work for you? Drop your thoughts below!

Good afternoon!  I am currently working in InDesign 13 and would like to know if there is some way to globally change the strike through text DEFAULT option for the width of the strike through line. The perfect world answer would be to change the default so if I open a NEW document OR an EXISTING document - the new default I set would apply. If that is not possible - at least change the default so it applies to everything in the document - not just one text box.  Can anyone help? I'd be much obliged.  BTW, interesting that the strike through option on this Adobe webpage is a standard width that works exactly the way I'd like InDesign to work: strikethru

템플릿 내보내기를 하려니까 임시 컴포지션이 생성되기만 하고사진처럼 뜨며 저장할 수 있는 창이 뜨지 않습니다.......다른 글들 찾아봤고 버전도 다운그레이드, 설치 삭제 캐시 삭제 uxp 삭제 환경설정 초기화 폰트 초기화 등 다른 글에 직원분이 답변해주신 방법으로 모두 시도해봤으나 되지 않네요..... 버전은 25.1로 다운그레이드 했고 윈도우 10입니다.