Resuelto

How to borderless printing With photoshop When i use photo shop cs5 or 2015CC and i will print on 10*15 or 18*13cm i get border on top and bottom   I've tried a lot of changes does not help.printer I from Picasa or any other services, image programm at the computer, printed correctly without the top and bottom.why is it so hard to print in photoshop properly.hope none has one answer to this.Christmas greetings from Birgitte.

Yesterday on opening my Photoshop 2022  I had the popup again about updating to  Elements 2025 so I went intp preference and unchecked some boxes as I had read on this site to do that. Later when I opened it again another box appeared saying to scan Q code or paste link in browser and verify my Adobe account . Upon correctly signing in it then asked me to enter my serial number for the product. That seemed to work and I eventually was able to use my program.  Today no pop up of upgrade to 2025 but  same thing about signing into my Adobe account to verify and entering serial number happened today and even more delay as the editor portion took awhile to load.   Is this because I changed my preferences in the editor portion.  Should I go back in and check those boxes I unchecked?  I am happy still with the version I have as works for what I want to accomplish.  But I don't want to go through this rigmorale everyday to open program. advice wante

Rather often, as in 43 images in a ratio of 43:27 rejection:approval rating of images, often I understand the quality is lacking or some artificats exist. I get that.However, sometimes I do not get it at all.I edit most of my images as I shoot in raw, but I still try to make it look natrual.Some images that is accepted has arguably worse quality, than some images that gets rejected.For example;But, not to dwell. I understand that some images has to heavy vignette or is a bit too much edited or saturated for stock. But this these ones I do not understand at all what was the quality issue here.Does anyone have any clue? So I can improve and learn what it would possibly be.(Images has been attached as files).Sincerely /Alex 

Adobe Reader is Lagging and Slow. To the point where it has become unusable on my 16" Macbook Pro 2019. It becomes most unusable when scrolling through large PDFs with multiple pages. The application laggs far worse than stock macOS 'Preview' app which runs smoothly. Have I got a setting wrong? I am using default settings from a fresh install. Adobe Reader: 2022.003.20314 Adobe Install Info:Architecture: x86_64Processor: IntelBuild: 22.3.20314.0AGM: 7.0.2CoolType: 8.1.1JP2K: 4.0.0.52132 Please help. Any suggestions?

In Adobe Camera Raw, with a studio portrait, shot on clean grey background for example, I can easily mask the subject (or background).How can I create a streak of "feathered" light across the background, to go BEHIND the subject?(I know how to do radial and lineal gradients)I'm sure I watched a tutorial earlier this year but can't remember how to.Your help would be appreciated, thanks

So I saved my PSD file this morning and when I came home later, PS didn't want to re-open it, either giving me a loading cursos with nothing after that, or throwing a generic error message. The file is fine, I'm sure, because I can import it into other CS apps like Lightroom or AfterEffects, but PS has a problem for some reason. I have Windows 11, 24GB RAM and an AMD Radeon laptop graphics. The file itself doesn't have that many layers, around 50, I think.Any help, please?

When generating a transcript it becomes possible to remove for instance silences and breaks. You can search for a word within the transcript, but you can't actually delete it when right clicking for instance. How do you delete a section of the timeline directly by deleting the word?

Hi there, I'm having this issue on both Photoshop 2024 v.25.12.0 and Photoshop 2025 v.26.1.0 See attached image. Previously in the Print Settings dialogue, there was an option for media type that had multiple paper type options (e.g. fine art dense, matte photo paper, platinum, etc.). And now there's only the options for paper type to select auto select, photo, or plain paper. I still have my ICC profiles. So I can select Photoshop Manages Colors and then select my profile. But because I can't select the media type specifically the prints are coming out all wrong. Is this a horrible managed PS update? Or is something wrong with my set up? What I've tried so far:Updated to the most current versions of PSDeleted the printer (Canon Pro-1000) as well as all the files under /libraryChecked that I am on the latest printer firmware (it is current)Updated/reinstalled the printer driverReinstalled the printer I've been struggling with a strong magenta cast on my printed imag

My cursor is stuck on the hand tool. I have Photoshop 26.9 and Mac 15.6, so I think I'm pretty much up to date. How do I recover use of my other tools?

I know, I know, CMYK colour space is smaller than sRGB so some colours look dim/dull yada yada yada. I'm well aware of  that, but that's not the issue I'm facing. So I'm working in a Photoshop file and forgot to set CMYK colour space at the beginning. When I go to Image > Mode and set it to CMYK the colours looks CRAZY dull, almost as if there's a white filter with 50% opacity set over the whole image. It doesn't make sense. I have experience in printing and I've seen what printers can do, but my orange colour I'm seeing looks more like gray than orange. When I go to websites that convert HEX to the closest CMYK colour my orange looks SO MUCH more vibrant than whatever I'm seeing in Photoshop. But, if I don't do that, and instead go to Edit > Convert to Profile and set CMYK there than the image looks vibrant.  And if I go to create a new file with CMYK at the start, upload my exported png there that the colours also look vibrant, yet it's CMYK mode from the st

Hello,I am working on my photographic portfolio website and I have the following issue: when you hover over a page cover in a page collection, it shows the page title, but also shows the page date above it. That date could be edited when you hover over the page cover and select the pencil, then: Edit page info. It doesn't seem possible though to specify the date to be hidden, when hovering over the page cover, and only page title to be shown in that case. Is it possible to hide the date and how?

Photoshop 2025 was previously working fine and able to open camera raw files with Sony and DJI. Starting Oct 28, it has not been able to open any camera raw files. Photoshop 2025 freezes, and I need to use the task manager to shut it down. Photoshop 2025 is able to open other file types, like jpeg. I have uninstalled Photoshop 2025 with uninstalling preferences and installed it again, and the result is the same. I have gone to Edit/Preference/ Camera Raw Preference/ unchecked Use GPU. Please advise. 

Using Coldfusion2023 update13 developers edition.  When I try to update to either update14 or update15, the Oracle package goes invalid.  The package management tool says it is installed, but the Coldfusion engine says that it is not installed and all my Oracle queries fail.  I tried to uninstall Oracle and reinstall with no change to the failing queries.  Even when I tried to rollback to update13, the problem still persisted after updating to either 14 or 15.  Any suggestions to get to the later more secure updates working?  I found some tips, regarding adding more JVM params, clearing some cache stuff, but none of those things helped the Oracle package work again.

Bonjour, J'ai 100 photos en attente de validation depuis 5 à 10 mois ! J'ai soumis depuis quelques nouvelles photos, qui ont été traitées. J'avais contacté le support Adobe Stock par mail il y a 6 mois, qui m'avait expliqué que c'était normal et qu'il fallait que je sois patient... mais force est de constater que c'est bloqué ! Or d'après ce que j'ai pu lire dans certains posts ici, ce type de blocage arrive et il faut l'intervention du support Adobe Stock pour le résoudre, d'où mon message... Merci donc par avance pour votre aide 🙂 

Is there a script that can set a specified hotkey as the default?

Why is my LRC catalogue not showing version 14.5.1 only 13.3 catalogues? how can I get it to 14.5.1. Thanks

In the first time i save .webp file I could choose the image compression, but after the first time it's gone, how I can change the image compression? In the first time: After the first time: 

I missed the Beta button for some reason: 

Hi,Just created a few videos with AI, and I thought it produced a good AI video, but it was rejected for quality issues. I deliberately controlled the depth of field in the prompt to give the front girl attentionI upscaled the video as I have not found one that does native 4KI compared to Premiere Pro video 'extend video' option to see what Adobe produces, but was not impressed by their AI engine quality. I have also include a link to the full resolution video here:Halloween Time Video  So any help would be appreciated from other contributors who submit AI video (including video generation suggestions for 4K) Regards,Brett  

Every time I open a file in photoshop it automatically adds a new smart layer. I do NOT have "always create smart objects when placing" checked in preferences. How can I stop this ?

I have an existing PC Windows 10 with Lightroom 6. Am buying a new PC Windows 11 and subscription Lightroom 1TB, (I thought it was called Lightroom Classic). My question, is it preferable to download Lightroom 1TB on older PC W10 first and setting up with existing LR6 back up catalog OR installing on new PC W11 with LR6 back up catalog OR it does not matter either method?        

I used to be able to quickly skip to the next picture to edit while staying in a brush setting without having to reopen the mask tool again and click on brush and clicking on setting. I am unable to do that now with the new mask update. Have any of you been able to figure out how to quickly go to the next picture while staying in the same brush setting? So when I go to the next picture, it automatically opens the brush tool in the previous setting, instead of having to go through so many steps to open it again for each individual picture. Many thanks!

For example: Copy all files under‘..preSetting’ + ‘/bb/’toFolder.desktop + ‘/aa/’My path structure is as follows, with “Script” at the same level as preSetting:D:/OO/Script/myscript.jsxD:/OO/preSetting/bb/This one below seems wrong. //var activeDocPath = String(app.activeDocument.fullName); var copyToPath = String(Folder.desktop + '/aa/'); var sPath = String("/" + PreSetting + '/bb/'); //alert(sourcePath); //alert(pShortcut); var copiedFile = copyFile(sPath, copyToPath); function copyFile(sourcePath, destinationPath) { var fp = Folder(sourcePath) //get the files in MyFiles var f = fp.getFiles(); alert(f); alert(f.length); for (var i = 0; i < f.length; i++) { //try { if (!f[i].exists) { throw new Error('File not found: "' + sourcePath + '".'); } else { var dup = File(destinationPath); f[i].copy(dup) return dup; } } }  

Is it possible to buy Photoshop without a subscription? I don't use Photoshop often but I feel like it would be awesome to have it for when I do need to use it like once every month or two. Thanks!

Hello, Thanks in advance for any quick steps on how to make a wood floor cheveron pattern in sampler? Please note that I downloaded a non pattern .sbsar wood from substance source, and I want to make that into a Cheveron Wood Pattern.  Attached in an example of the chevron pattern. Thanks,Sandra